Bus machine refers to a common path connected by multiple equipment in the form of parallel branches. The main function of bus machine is to process Copper and aluminum buses of different specifications. It has five processing units: shearing, punching, large bending and small bending. It is suitable for the construction site of large electric control box and power transmission and distribution construction project. So what should be paid attention to when operating the bus machine?
1. Working of bus cutting unit
Turn the "shear work" button on the main operation panel to the task status, and the "shear work" indicator on the main panel is on
Step on the pedal switch or corresponding knob of the shear unit, and the slider will go down until it touches the lower dead center switch and go to the lower dead center. If you hold the foot switch or the corresponding button while the slider is descending, the slider will stop. At this time, if the foot switch or corresponding button is pressed, the slider will continue to move downward; If you press the "up" button on the cutting unit panel, the slider will rise to the top dead center and stop
2. Bus generator startup
Close the air switch in the electrical box
Turn the "control power" key switch to the "I" position to turn on the control power. At this time, the "power on" indicator on the main panel is on
3. Bus bending unit
Turn the "bending work" knob switch on the main operation panel to the working position, and the "bending work" indicator on the main panel is on
Step on the pedal switch or corresponding knob of the bending unit, and the slider will move forward until it touches the front dead center switch and go to the original shape. If you hold the pedal switch or the corresponding knob while the slider is moving forward, the slider will stop.
At this time, if you step on the switch of the bus machine or the corresponding knob, the slider will move forward continuously; If the "back" knob on the bending unit panel is pressed, the slider returns to the original shape and stops.
The above are several aspects that should be paid attention to when operating the bus machine. I hope it will help you. If you have other questions about bus machine, please call us.
